YDS Diagnostic 1.33 Software for Yamaha Outboard Jet Boat WaveRunner

Description

YDS Yamaha 1.33 software
You will be able to read all of your engine diagnostic codes and records, engine hours, activate low and high pressure fuel pumps, test individual injectors and ignition coils, set tilt-limit, de-activate most engine sensors for testing, view all sensor readings (TPS, IAC, battery voltage, charging voltage, rpm, oil pressure, MAP, etc..), stationary and static diagnostic tests, and many other functions. All data from your engine can be saved to your computer for future reference using Microsoft Excel.
PC, Laptop , or Tablet hardware requirements are:
Windows Based Operating Systems (XP, VISTA, 7, and 8) (32 or 64 bit), One available USB port, and a DVD/CD-ROM drive for the software installation.
OUTBOARD APPLICATIONS
Models--
All Yamaha HPDI OUTBOARD MODELS
Z150 , LZ150 , VZ150 , Z175 , VZ175 , Z200 , LZ200 , VZ200 , VZ200 , Z225 , VZ225 , Z250 , LZ250 , VZ250 , Z300 , LZ300 , VZ300
All Yamaha EFI 4-STROKE OUTBOARD MODELS
F30 , F40 , F50 , T50 , F60 , T60 , F70 , F75 , F90 , F115 , LF115 , F150 , LF150 , F200 , LF200 , F225 , LF225, F250 , LF250 , F300 , LF300 , F350 , LF350 

(International Models)
All Yamaha HPDI models
Z150 , LZ150 , Z175 , LZ175, Z200 , LZ200 , Z225 , LZ225 , Z250 , LZ250 , LZ300 , Z300
All Yamaha EFI 4-Stroke Models
F30 , F40 , F50 , FT50 , F60 , FT60 , F70 , F75 , F80 , F90, F100 , F115 , FL115 , F150 , FL150 , F200 , FL200 , F225 , FL225 , F250 , FL250 , F300 , FL300 , F350 , FL350

All Yamaha YDS-compatible Personal Watercraft (Jet-Ski's/ Jet-Boat's)
JET-SKI MODELS
GP1300R , VX , VX CRUISER , VX DELUXE , VX SPORT , FX , FX CRUISER , FX HO FX CRUISER HO , FX SHO , FX CRUISER SHO , FZR , FZS , VX18R , VX18S
JET-BOAT MODELS
SR230 , SR230 HO , SX230 , SX230 HO , AR210 , AR230 , AR230 HO , SX210 , 212X , 212SS , 232 LIMITED , AR240 , AR240 HO , SX240 , AR190 , SX240 , SX240 HO, 242 LIMITED
MERCURY MARINE 225 (EFI 4-STROKE)
ALL MERCURY MARINE 75, 90, 115, and 225 EFI 4-STROKES MANUFACTURED BY YAMAHA MARINE
Important:
The software will NOT work on Yamaha OX66 fuel injected engines, Yamaha carbureted engine, or MAC computers!
I see some are having problems installing or getting the ecm to communicate
1) Install the software  1.33 for 2012 or before models.  It looks as if you need YDIS 2.13 for 2013 and newer boats. At the moment it appears there is no available software to access these boats.
2) Update the DB on the software (lauch the SW and press F1)
3) Locate your connection point on the engine. If you have a 2006 or less, it will be behind the cover plate in the rear starboard storage locker (yeah who would have thunk!). On 2007+ 230's it is behind the plate on the starboard side of the engine compartment.  On 210s, it is tucked into the wiring harness over the top of the port engine. It will have one red wire on one side of the plug and 3 or 4 wires on the side you will plug into.  On the 2015s the YDIS couplers are located in the driver's helm compartment.   The YDIS couplers are identified by "DIAGP" tag (port engine) or "DIAGS" tag (starboard engine) on the deck wire harness.
4) Plug in the YDS cable to your engine.
5) Start your engine
6) Turn on the water to your engine
7) Plug in the USB plug into your computer
7A) One time only step--you should get a "New Hardware" message...if the disk is still in the drive, it will find the drivers. If it is not, then browse to C:\Program Files\YDS\Driver
8) Launch the YDS software.
9) Hit Enter it should says something about communicating to the ECM. If it says it failed to communicate to the ECM, then either your driver didn't install or you aren't plugged in the proper sequence.
10) Hit enter and you should have a complete menu of items you can look at. For Engine hours click on "Data Logger" and then click on "Engine Operating Hours according to engine speed"
10a) If you wish to save the hours, click F2 to save the file (it saves as a .csv file or a "Comma Separated Value" file and an .xls file....in a nutshell....a file Excel can read, or most any data application like Notepad, wordpad etc.)
11) If you want to check out and see if you have had any engine "errors", click on the "Diagnosis", and then on "Diagnosis Record".
12) Shut off the water
13) Turn off the engine
Repeat for other engine.
There are lots of other things this software can do, but that is for another day. Here is what it read as an example for my engine hours:
Engine speed Time[h]
- 2000 r/min 30.67
2000 - 4000 r/min 53.97
4000 - 6000 r/min 7.4
6000 - 8000 r/min 27.82
8000 - 10000 r/min 11.2
10000 - 12000 r/min 0.99
Total hours of operation 132
Package List:
1pc x DVD
Not included interface