Voltage Regulator Rectifier for Johnson Evinrude 583408 582399 18-5708 6-10 Amp

Description

REGULATOR RECTIFIER 3-WIRES FOR JOHNSON EVINRUDE OUTBOARD 10-235 HP MODELS 1980-2001
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Brand new Voltage regulator
Our part is a Plug-and-play unit, direct fit, and easy to install.
Higher grade of electric components.
The Quality exceeds the OEM equipment
All products shipped are tested
*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
VEHICLE MODELS FITMENT
Johnson Evinrude 9.9 HP -- 1995-2001
Johnson Evinrude 15 HP -- 1995-2001
Johnson Evinrude 60 HP -- 1986-1991
Johnson Evinrude 150 HP Carb -- 1980-1983
Johnson Evinrude 175 HP Carb -- 1980-1983
Johnson Evinrude 200 HP Carb -- 1980-1983
Johnson Evinrude 65 HP -- 1984-1991
Johnson Evinrude 70 HP -- 1980-1991
Johnson Evinrude 75 HP -- 1980-1988
Johnson Evinrude 85 HP -- 1980
Johnson Evinrude 88 HP -- 1987-1996
Johnson Evinrude 90 HP -- 1981-1998
Johnson Evinrude 100 HP -- 1980, 1984-1986, 1988-1994
Johnson Evinrude 110 HP -- 1986-1989
Johnson Evinrude 112 HP -- 1994-1996
Johnson Evinrude 115 HP -- 1980-1985, 1990-1998
Johnson Evinrude 140 HP -- 1980-1984
Johnson Evinrude 235 HP -- 1980-1983
OEM PART REPLACEMENT
580765
580795
SPECIFICATIONS
Dimensions :
Thickness : 34 mm
Length : 62mm
Height: 28mm
Fixation holes center to center : 49mm
Wires length: 127 mm 131 mm 127 mm
Other specifications :
Number of plugs : 0
Number of pins : 3
INSTRUCTIONS
Before installing your new voltage regulator rectifier:
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulatorrectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.