Add Amplifier Adapter Interface Amp Select GM Vehicles Chevy GMC OEM Stereo P&P

Description

Add An Amp Amplifier Radio Adapter Interface Select GM Vehicles Chevy GMC Camaro
Want to add a subwoofer to your original stereo?
Don’t want or know how to cut into your wiring?
Take the wiring guesswork out of the installation with this plug and play wire harness!  Installation is as easy as 1, 2, 3!
1.      Remove your OEM factory radio
2.      Unplug the OEM factory wiring and plug in this wire harness
3.      Reinstall your OEM factory radio
What is it?
This wire harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier.  All that’s left for you to do is connect the main power wire from your battery and ground to the amp! (Not included)
What you will receive
One (1) plug and play wire harness
One (1) Add-A-Circuit fuse tap
One (1) 3 amp fuse
Compatibility Notes:
• Audio volume to the amplifier can be adjusted by the dials on the harness.  For easier access we recommend using an external volume knob.(Not included but we have some for sale!)
• Certain applications benefit from a bass knob to control subwoofer volume independent from the radio as volume is adjusted post amplification.  Check our store for other listings with these parts included!
• NOT compatible with premium sound systems like Bose, Monsoon, etc.
Converter adjustment instructions:
After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise.
Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume.
Select one of the adjustment pots and turn it slowly clockwise until you notice audio distortion and then stop.
Turn the remaining pot to the same position as the previously adjusted pot.
Compatibility Chart:(Message us with questions!)
MAKE
MODEL
TRIM / QUALIFIER
From
To
Chevrolet
Camaro
w/ 7-inch radio, RPO code: IOB
2016
2018
Chevrolet
Colorado
w/ 7-inch radio, RPO code: IOB
2017
2018
Chevrolet
Cruze, Cruze Hatchback
w/ 7-inch radio, RPO code: IOA
2016
2018
Chevrolet
Equinox
w/ 7-inch radio, RPO code: IOB
2018
2018
Chevrolet
Malibu
w/ 7-inch radio radio, RPO code: IOA
2016
2018
Chevrolet
Silverado 1500 LD, 2500 HD, 3500 HD
w/ 7" radio, RPO code: IOB
2019
2019
Chevrolet
Silverado 1500, 2500 HD, 3500 HD
w/ 7" radio, RPO code: IOB
2016
2018
Chevrolet
Trax
w/ am/fm radio, RPO code: IP1
2017
2017
GMC
Canyon
w/ 7-inch radio, RPO code: IOB
2017
2018
GMC
Sierra 1500 Limited, 2500 HD, 3500 HD
w/ 7" radio, RPO code: IOB
2019
2019
GMC
Sierra 1500, 2500 HD, 3500 HD
w/ 7" radio, RPO code: IOB
2016
2018
DOES NOT WORK WITH BOSE/PREMIUM SOUND EQUIPPED VEHICLES!
What is an RPO Code?
A Regular Production Option (RPO) is a General Motors standard coding for vehicle configuration options. These codes are a combination of 3 alphanumeric characters and refer to a specific option or modification to the vehicle. The RPO Codes can be found on a placard labeled “Service Parts Identification” in the glove box, on the trunk floor or inside the driver's door panel.
Please check to ensure you have the correct radio RPO code prior to purchase!